The payout is a mechanism question, not a location question
A Mills slot machine pays out when its internal mechanism registers a winning combination on the reels, and that mechanism is identical whether the machine stands in a casino, a private collection, or a museum. The venue's address does not change how the machine decides to pay. What changes with location is only how you reach the machine, and for that question this article can give you the venue's fixed coordinates and straight-line distances to reference points, but not a road route or a travel time.
This article does not publish driving mileage or driving time. Road distance is always longer than straight-line distance, and the difference depends on terrain, water crossings, and how the road network is laid out. If you are planning a trip to a specific machine, treat the straight-line figure as the floor, not the route.
What makes a Mills machine pay
A Mills slot machine is a mechanical device. The reels stop on a combination, and the payout mechanism releases coins or tokens when that combination matches the payout schedule printed on the machine. No player action after the reels stop changes the result. The machine's payout schedule is fixed by its design and by any modification made to its internal parts.
Because these machines are mechanical, the payout is not governed by a random number generator in the modern electronic sense. It is governed by the physical stopping position of the reels and the payout fingers or slides that read those positions. A machine that has been altered, worn, or poorly maintained may not pay exactly as its original schedule intended, which is why collectors and operators inspect the mechanism rather than trusting the printed table alone.
The venue's location is the only distance fact you can verify
No venue-specific coordinates were supplied for this article, so no straight-line distance can be stated for any specific Mills machine location. The venue's city and state are not available in the reference data for this query, and without coordinates there is no documented pair to measure. This article therefore cannot tell you how far any particular Mills machine is from any other point.
What can be stated is the method. A venue's position is fixed. Your starting point is not. To measure the straight-line distance from your own location, take the venue's documented latitude and longitude and your own latitude and longitude, and compute the great-circle distance between them. Any mapping tool will do this. The result is the shortest path across the surface of the earth, not a road route.
Why straight-line distance understates the trip
Straight-line distance ignores everything that makes a real journey longer. A river between two points forces a crossing at a bridge that may be miles from the direct line. A mountain range forces a pass or a tunnel. A state border does not add distance by itself, but the road network on either side may not connect in the direction you want to travel.
The table below shows the structure this article uses when documented pairs exist. No pairs exist for this query, so the table is empty of venue-specific rows. The measurement type column is included to show that every figure this site publishes is great-circle, never road mileage.
| Reference point | Straight-line miles | Measurement type |
|---|---|---|
| No documented venue-to-reference pairs are available for this query. | ||
When pairs are available, each row carries the exact number from the documented reference set, labelled as straight-line in the same sentence. No row ever carries a driving time, a road number, an exit, or a route instruction. Those are not in the reference data and are not published here.
What to confirm before you go
If your goal is to see a specific Mills machine pay out, confirm three things before you travel. First, confirm the machine is still on the floor and still operational. Second, confirm the venue's current hours and entry requirements. Third, confirm the machine's payout schedule, because a modified or partially restored machine may not match its original printed table.
The authoritative source for all three is the venue's own contact page or guest services desk. The helpline printed in the footer below can also direct you to responsible-play resources, but it cannot tell you whether a particular machine is on the floor. No third-party article, including this one, can verify a machine's current status, and none should be relied upon for it.
FAQ
Can I make a Mills slot machine pay out more often?
No. The payout frequency is set by the machine's mechanical design and the position of its reels at rest. No playing technique changes it. If a machine has been altered, its payout schedule may differ from the original, but that is a physical modification, not something a player controls during play.
Does the venue's location affect how a Mills machine pays?
No. The payout mechanism is internal to the machine and does not change with the building, the city, or the state. Location affects only how you reach the machine, and for that question the straight-line distance is the only figure this article can verify when coordinates are supplied.
How do I find the straight-line distance from my location to a venue?
Take the venue's documented latitude and longitude and your own coordinates, then compute the great-circle distance between them. Any mapping tool will do this. The result is the shortest surface path, not a road route. Road distance is always longer and is not published in this article.
Play responsibly
Gambling should be treated as paid entertainment, never as a way to earn income or recover losses. 1-800-MY-RESET (1-800-697-3738)
18+ or 21+ depending on where you are; follow the minimum age that applies to you.
This article is general information about how these mechanics work. It is not legal advice and not a recommendation to gamble or to use any particular operator. Availability and legality differ by jurisdiction — check the rules that apply where you are.