EMC posts record Q3 EPS of NT$40.46 and approves 9.4 million-sheet capacity expansion

EMC posts record Q3 EPS of NT$40.46 and approves 9.4 million-sheet capacity expansion

N
News Editor
2026-10-28 08:51:33
EMC, a leading copper clad laminate (CCL) maker, reported record results for the third quarter of 2026, with revenue of NT$60.88 billion, a gross margin of 37.7%, net profit of NT$14.5 billion, and earnings per share of NT$40.46. Revenue, net profit, and EPS all reached new quarterly highs. The company’s first-nine-month EPS came in at NT$82.92, nearly double its full-year 2025 EPS of NT$41.67. The company also outperformed the guidance it gave at its August investor conference. EMC had projected third-quarter revenue growth of 15% to 20% quarter over quarter and a gross margin of 35% plus or minus 1.5 percentage points. Actual revenue rose 28.8% from the previous quarter, while gross margin reached 37.7%, above the top end of that range. At the same time, EMC’s board approved a new expansion plan covering Taoyuan, Kunshan, Zhongshan, Huangshi, and Penang from 2027 to 2030, adding 9.4 million sheets of capacity. Once completed, total group capacity will reach 15.25 million sheets. According to the report, the company expects demand to stay strong across AI servers, general-purpose servers, switches, optical modules, low-earth-orbit satellites, and memory modules.

EMC, the leading copper clad laminate (CCL) supplier, released its third-quarter 2026 results on Oct. 28, reporting revenue of NT$60.88 billion, a gross margin of 37.7%, net profit after tax of NT$14.5 billion, and earnings per share of NT$40.46. Revenue, net profit, and EPS all set new quarterly records. The company said both revenue and gross margin came in above the guidance it gave at its August investor conference. For the first three quarters, cumulative EPS reached NT$82.92, nearly twice its full-year 2025 EPS of NT$41.67.

Quarterly revenue, margin, and profit all moved higher

According to EMC’s third-quarter 2026 financial report, the main figures were as follows:

  • Quarterly revenue was NT$60.88 billion, up 28.8% from the previous quarter and 142% from a year earlier.
  • Gross margin was 37.7%, up 3.8 percentage points from the second quarter and 7.6 percentage points from the same period last year.
  • Net profit after tax was NT$14.5 billion, up 46.9% quarter over quarter and 265.7% year over year.
  • Quarterly EPS was NT$40.46, compared with NT$11.19 a year earlier.

For the first nine months, revenue totaled NT$141.227 billion, gross margin was 34.47%, operating profit reached NT$38.549 billion, operating margin was 27.29%, net profit after tax was NT$29.710 billion, and EPS came in at NT$82.92.

In the second quarter, EMC posted revenue of NT$47.27 billion, a gross margin of 33.9%, and EPS of NT$27.55. EPS then jumped to NT$40.46 in the third quarter. The original report described that performance as earning more than one share capital in a single quarter.

Results beat the company’s August guidance

At its August investor conference, EMC had projected third-quarter revenue growth of 15% to 20% quarter over quarter, with a gross margin target of 35% plus or minus 1.5 percentage points. The actual outcome was stronger. Revenue rose 28.8% from the prior quarter, which the report calculated as roughly NT$4.2 billion to NT$6.5 billion above the guided range. Gross margin reached 37.7%, or 1.2 percentage points above the upper end of the guided range at 36.5%.

ABMedia said market analysis pointed to two drivers behind the latest growth: pricing and product mix. Of the 43% quarter-over-quarter revenue increase in the second quarter, about 28 percentage points came from price hikes, while the share of high-end products kept rising. Based on an increase of about NT$13.6 billion in third-quarter revenue and about NT$6.9 billion in gross profit, the incremental gross margin on added revenue was about 51%, suggesting that growth was mainly driven by higher-priced products.

Third-quarter operating margin was estimated at about 30.7%

The filing did not separately disclose third-quarter operating margin. Based on the report’s calculation using first-nine-month operating profit and a first-half operating margin of 24.72%, third-quarter operating margin was estimated at about 30.7%, around 6 percentage points higher than the first half.

The report said the main reason was the improvement in gross margin. Third-quarter operating expenses were about NT$4.27 billion, equal to roughly 7.0% of revenue, slightly below 7.3% in the first half. Even so, the absolute amount of expenses increased clearly, showing that new plant and R&D investment had started to show up.

On non-operating items and taxes, pre-tax profit for the first three quarters was NT$38.683 billion, only NT$134 million higher than operating profit, indicating that earnings were driven almost entirely by the core business.

Balance sheet and inventory build

As of the end of September, EMC had total assets of NT$193.743 billion and total liabilities of NT$120.299 billion. Its debt ratio was about 62.1%, and equity attributable to owners of the parent stood at NT$73.468 billion.

The industry interpretation in the report said raw material inventory rose from NT$6.78 billion in the first quarter of 2025 to NT$15.74 billion in the second quarter of 2026, as the company prepared materials in advance and locked in costs.

Board approves 9.4 million sheets of new capacity

EMC’s board also approved a plan to add 9.4 million sheets of capacity between 2027 and 2030 across Taoyuan, Kunshan, Zhongshan, Huangshi, and Penang. Once the expansion is completed, total group capacity will reach 15.25 million sheets.

That compares with the company’s August investor conference statement that monthly capacity would rise from 5.8 million sheets in 2025 to 11.1 million sheets in 2028. The newly announced expansion is larger in scale.

In market position, EMC holds more than 70% share in high-density interconnect, or HDI, materials and has ranked No. 1 globally for 20 straight years. Its share in high-speed materials was 38.6% in 2025. The company expects full utilization and full sell-through to continue over the next year, with demand covering AI servers, general-purpose servers, switches, optical modules, low-earth-orbit satellites, and memory modules.

Focus shifts to ramp-up risk and high-end material volume

The report also cited analysts who warned that depreciation for new plants starts being recognized when construction begins, while utilization and yield still need time to ramp. That could create pressure in 2027, with costs arriving before revenue. Whether gross margin can hold up will depend on how quickly high-end materials such as M9 scale.

ABF substrate CCL remains a theme to watch

ABMedia said the third-quarter gross margin and full-capacity sell-through reinforced EMC’s strong position in top-tier AI computing tray applications and in cloud providers’ in-house ASIC programs, in line with views previously shared by PCB industry analyst kokycpcb. At the same time, the report said progress by China-based Shengyi Technology in PTFE and shipments by Nan Ya Plastics in 2027 for M6 and M7 applications remain key competitive points to watch.

The report added that Japanese suppliers, which hold most of the ABF substrate CCL market, have been expanding too slowly, and end customers have accelerated qualification of Taiwanese and Chinese suppliers since the first half of 2026. Goldman Sachs specifically named EMC as a company that could start gaining share in the second half. The actual contribution from ABF substrate CCL, however, still awaits more detail from future investor conferences or related reports.

The third-quarter report showed profit momentum that was stronger than expected under rising AI demand, price increases, and a richer product mix. The market is now watching the company’s fourth-quarter revenue and gross margin guidance, the share of higher-priced products such as M9, and how much new themes may contribute.

This article was originally published by Bit.Fan. For more cryptocurrency news and market insights, visit www.bit.fan.
10400

Disclaimer:

The market information, project data, and third-party content displayed on this platform are for industry information sharing only and do not constitute any form of investment advice or return commitment.

Cryptocurrency trading carries high risks. Users should fully assess their risk tolerance and make independent decisions. All profits, losses, and legal responsibilities are borne by the users themselves.